Maxi-matic MIM-5802 Manual de instrucciones Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 11
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
OPERATING INSTRUCTIONS
1. Open the lid, remove the Ice Basket and pour water
into the water reservoir. Do not exceed the maximum
water level line or fill less than the minimum water
level line (See Figure 1).
2. Place the Ice Basket back into the ice maker. Make
sure the water level in the water reservoir is not higher
than the bottom of the Ice Basket.
3. Plug in the unit.
4. Press "SELECT" to choose the desired ice cube size
SMALL” or "LARGE.” When you choose large ice
cubes, the "LARGE" indicator light will illuminate. When
you choose small ice cubes, the "SMALL" indicator
light will illuminate.
Figure 1.
5. Press the “START” button to start machine (See
Figure 2), the ice making process will last
approximately 1 hour for the first batch and 30
minutes thereafter depending on size chosen, ambient
temperature and how long the unit has been in
operation.
6. The ice maker will automatically stop making ice when
the ice basket is full and the "ICE FULL" indicator light
will illuminate.
7. Press the “STOP button at any time to stop making ice.
Figure 2.
8. Change the water in the tank every 24 hours to maintain
a reasonable hygiene level. Please drain water if the ice
maker is not in use.
9. If "ADD WATER" indicator light is illuminated, the water level has reached the
minimum water level.
- Refill the tank with fresh water. Do not exceed the maximum water level.
- Press “START” to restart the ice making process.
**The ice maker will not automatically re-start the ice making process after the add water light has
turned on. Upon adding more water, you must push “START” to restart the ice making process.
**If the ice in the basket melts and the water in the tank rises, you must STILL push “START” to
restart the ice making process.
WARNING:
Only fresh, clean water should be used to make ice. Other liquids such milk, juice, and soda will
damage the machine!
NOTE:
When the ambient temperature is lower than 70°F, the SMALL setting is recommended.
When the ambient temperature is higher than 77°F, the LARGE setting is recommended.
This unit has the unique ability to make CLEAR ice. An insufficient amount of water in the
water tank may lead to white, cloudy ice. Add more water to the water tank for CLEAR ice,
which is the desired effect.
6
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios